2m x 2m x 2.5m Paint Mixing Room

This 2m x 2m x 2.5m paint mixing room provides a dedicated enclosed workspace for the preparation, mixing and handling of paints, coatings, solvents and associated materials. Its compact footprint makes it well suited to workshops where space is limited, while providing a clearly defined area separate from the main spraying and production environment.

The room is constructed using single-skin galvanised steel panels, providing a robust and practical enclosure suitable for demanding workshop and industrial environments. The galvanised finish provides a durable surface that is straightforward to maintain and clean.

Access is provided by a 1,000mm wide x 2,000mm high personnel door, allowing convenient pedestrian access to the room.

Fresh air enters the room through a 600mm x 600mm G4 pleated filter panel positioned within the roof. This filtered air inlet provides a controlled supply of replacement air while helping to reduce the entry of dust and airborne contaminants into the mixing area.

Extraction is provided by a 400mm diameter belt-driven axial fan fitted with a 0.75kW motor, delivering 5,400m³/hr at 180 Pa. The extraction system incorporates a low-level corner extraction duct within the room, designed to draw contaminated air from the lower portion of the mixing room.

This low-level extraction arrangement is particularly suited to paint mixing applications, as many commonly used solvent and coating vapours can be heavier than air and may accumulate at lower levels. Drawing air from the lower section of the room helps capture contaminated air closer to where it may collect and remove it from the working area.

The room also incorporates one internal light, providing suitable illumination for paint preparation, mixing and material handling activities.

The overall system provides a compact and practical solution for workshops requiring a dedicated paint mixing and preparation room, suitable for applications including automotive refinishing, industrial painting, manufacturing, joinery and general finishing.

Key Specification

• Internal size: 2m W x 2m L x 2.5m H
• Construction: Single-skin galvanised steel panels
• Personnel door: 1,000mm W x 2,000mm H
• Lighting: 1 x internal light
• Air inlet: 1 x 600mm x 600mm G4 pleated filter panel
• Air inlet position: Roof-mounted
• Extraction fan: 1 x 400mm diameter belt-driven axial fan
• Motor: 0.75kW
• Fan airflow: 5,400m³/hr at 180 Pa
• Extraction: Low-level corner extraction arrangement
• Application: Paint, coating and solvent preparation
• Suitable for: Automotive, industrial, manufacturing, joinery and finishing environments
• Delivery: Included within UK mainland

Please note: The advertised price includes the paint mixing room, extraction fan, roof-mounted G4 filter panel and internal light as specified above. Delivery to UK mainland is included. External extraction ductwork is not included. Installation is also not included in the advertised price.

Installation & Ductwork: The room and extraction equipment are supplied for installation by the customer or their appointed competent installer. All external ductwork, duct fittings, roof or wall penetrations, weatherproofing and associated installation works are excluded unless specifically stated within the quotation.

The customer is responsible for ensuring that the proposed installation complies with all applicable requirements and that the extraction system is correctly installed and commissioned for the intended application.