3m x 2m x 2.5m Paint Mixing Room

This 3m x 2m x 2.5m paint mixing room provides a dedicated enclosed workspace for the preparation, mixing and handling of paints, coatings, solvents and associated materials. The larger 3m width provides additional working space compared with the smaller version, while maintaining a compact footprint suitable for a wide range of workshops.

The room is constructed using single-skin galvanised steel panels, providing a robust and practical enclosure suitable for demanding workshop and industrial environments. The galvanised steel construction offers a durable and easy-to-maintain finish for day-to-day use.

Access is provided by a 1,000mm wide x 2,000mm high personnel door, allowing straightforward pedestrian access to the mixing room.

Fresh air enters the room through a 600mm x 600mm G4 pleated filter panel positioned within the roof. This provides a filtered supply of replacement air while helping to reduce the entry of dust and airborne contaminants into the working area.

Extraction is provided by a 400mm diameter belt-driven axial fan fitted with a 0.75kW motor, delivering 5,400m³/hr at 180 Pa. The extraction arrangement incorporates a low-level corner extraction duct, designed to draw contaminated air from the lower section of the room.

This low-level extraction arrangement is suited to paint mixing applications because many commonly used solvent and coating vapours can be heavier than air and may accumulate at lower levels. Drawing air from the lower portion of the room helps capture contaminated air closer to where it may collect and remove it from the working area.

The room is fitted with two internal lights, providing suitable illumination throughout the larger working area for paint preparation, mixing and material handling.

The overall design provides a practical and dedicated paint mixing and preparation room for workshops requiring a separate area for handling paints, coatings and associated materials. It is suitable for applications including automotive refinishing, industrial painting, manufacturing, joinery and general finishing.

Key Specification

• Internal size: 3m W x 2m L x 2.5m H
• Construction: Single-skin galvanised steel panels
• Personnel door: 1,000mm W x 2,000mm H
• Lighting: 2 x internal lights
• Air inlet: 1 x 600mm x 600mm G4 pleated filter panel
• Air inlet position: Roof-mounted
• Extraction fan: 1 x 400mm diameter belt-driven axial fan
• Motor: 0.75kW
• Fan airflow: 5,400m³/hr at 180 Pa
• Extraction: Low-level corner extraction arrangement
• Application: Paint, coating and solvent preparation
• Suitable for: Automotive, industrial, manufacturing, joinery and finishing environments
• Delivery: Included within UK mainland

Please note: The advertised price includes the paint mixing room, extraction fan, roof-mounted G4 filter panel and internal lights as specified above. Delivery to UK mainland is included. External extraction ductwork is not included. Installation is also not included in the advertised price.

Installation & Ductwork: The room and extraction equipment are supplied for installation by the customer or their appointed competent installer. All external ductwork, duct fittings, roof or wall penetrations, weatherproofing and associated installation works are excluded unless specifically stated within the quotation.

The customer is responsible for ensuring that the proposed installation complies with all applicable requirements and that the extraction system is correctly installed and commissioned for the intended application.