Fan Starter – 0.75kW, 400V

The 0.75kW, 400V fan starter is an enclosed direct-on-line (DOL) starter for controlling suitable three-phase fan motors with a motor current between 1.6A and 2.5A.

The starter is supplied complete with a built-in adjustable thermal overload, settable from 1.6A to 2.5A, so no separate motor overload is required. Start and stop controls are also incorporated into the enclosure.

Suitable for extraction and ventilation applications, including exhaust fans, extraction fans and other three-phase fan motors.

Suitable for exhaust and extraction fans

This exhaust fan starter provides a straightforward direct-on-line starting solution for compatible three-phase motors within the 1.6–2.5A operating range.

It can be used as a motor starter for an exhaust fan, extraction fan or other suitable ventilation equipment where direct-on-line starting is appropriate.

Key features

• Complete DOL fan starter with built-in thermal overload
• 1.6–2.5A adjustable overload range
• Suitable for motors up to 0.75kW
• 400V three-phase supply
• Direct-on-line (DOL) motor starting
• Integrated thermal overload protection
• Start and stop push buttons
• IP42 enclosed housing
• Compact double-insulated enclosure
• Class 10 overload protection
• Suitable for compatible three-phase fan motors

Important – ATEX suitability

This fan starter is not ATEX rated and must not be installed within an ATEX hazardous or zoned area.

Product specification

Motor rating: 0.75kW
Motor current: 1.6–2.5A
Supply: 400V AC, three phase
Output: 400V AC, three phase
Starter type: Direct-on-line (DOL)
Overload: Built-in, adjustable 1.6–2.5A
Trip class: Class 10
Enclosure rating: IP42
Dimensions: 150mm × 88mm × 140mm

The built-in overload range should be checked against the full-load current of the fan motor before purchase to ensure the starter is suitable.

Installation and electrical connection should be carried out by a suitably competent person.