NIKO 25 Series – 3000mm Long Track

NIKO 25 Series Track Profile

The NIKO 25 Series is a heavy-duty overhead track profile designed for applications requiring significantly greater load capacity and robust continuous material handling. With a safe working load of up to 400 kg per metre when correctly supported, the 25 Series is suited to heavier components, fixtures and products that require reliable overhead transportation throughout the production process.

The system provides a practical way of moving heavy products between different work areas without relying on repeated lifting or manual handling. NIKO 25 Series track can be configured with compatible trolleys, bends, joints and suspension components to create a complete overhead handling system tailored to the installation.

For coating and finishing applications, the 25 Series can be used to move heavier components through preparation, spraying, drying, curing and inspection areas. This can help maintain a consistent production flow while keeping components suspended throughout the process.

The higher load capacity also makes the 25 Series suitable for demanding industrial environments where both the product weight and handling equipment need to be considered as part of the overall system design.

Key Features

• NIKO 25 Series heavy-duty overhead track
• 400 kg per metre SWL when correctly supported
• Designed for high-load industrial handling applications
• Compatible with NIKO 25 Series trolleys and system components
• Suitable for straight runs and systems incorporating bends
• Suitable for heavier components and fixtures
• Ideal for paint spraying, coating, drying and curing
• Supports continuous movement through production areas
• Reduces the requirement for repeated manual handling
• Suitable for demanding manufacturing environments

Typical Applications

• Heavy-duty paint spraying
• Industrial coating systems
• Powder coating
• Automotive and commercial vehicle components
• Fabricated steelwork and metal components
• Manufacturing and assembly
• Heavy component drying and curing
• Industrial material handling

Important: The stated 400 kg per metre safe working load is dependent on correct installation and support spacing. The complete system should be designed according to the required load and operating conditions.